Skip to content
Leander Flooring

About Leander Flooring

We install and restore floors across Leander and the corridor around it — Cedar Park, Georgetown, Round Rock, Austin, Liberty Hill, the Lake Travis communities, and east to Hutto and Taylor. Vinyl plank, hardwood, tile and stone, carpet, refinishing, concrete coatings, and the substrate work that sits under all of it.

The thing this business is organised around

The Balcones Escarpment runs north to south through the middle of our service area, and it splits it into two places that need opposite advice.

West of it, up on the Edwards limestone through Cedar Park, Bee Cave and Liberty Hill, a slab was poured on rock. It does not swell in a wet spring and it does not shrink through a drought. When one of those floors reads out of level, it has been that way since the pour — a placement defect from a fast build, correctable permanently with a grinder.

East of it, through Hutto, Pflugerville, Manor and Taylor, the same slab from the same builder sits on Taylor Marl and Blackland clay that swells and shrinks every year. That floor is out of level because it moved, and it will move again. Rigid tile reports it. A floating floor rides it. A levelling pour placed at the bottom of a drought cycle is money spent on a shape the house is not going to keep.

Same house plan, eighteen miles apart, two different jobs. Nearly everything we do differently from a company working off a national playbook comes back to that one fact.

What we can tell you about credentials

Texas issues no state licence for flooring contractors. There is no number for us to display, and there is none for anyone else in this trade either. If a competitor advertises a "licensed flooring contractor" number in Texas, they are citing something other than a state flooring licence — a municipal registration, a general contractor credential, or a trade association membership. Those are real things; they are not a flooring licence, because that does not exist here.

We would rather say that plainly than let the absence read as something being withheld.

What you can reasonably ask any flooring contractor in this state, including us:

  • To see a certificate of insurance, issued directly by the carrier rather than forwarded as a photograph
  • Which manufacturer certifications the crew holds for the specific product being installed, since those are what most material warranties are conditional on
  • What the workmanship warranty covers, in writing, and how it differs from the manufacturer's product warranty
  • What moisture reading was taken, to which standard, and on what date
  • Which flatness tolerance the substrate will be brought to, as a figure

The last two are the ones almost nobody asks and the ones that predict whether a floor is still good in ten years.

How we work

Four commitments, all of them checkable

These are deliberately not badges. A badge is something you take on trust; each of the following is something you can verify on the day, and hold us to if we miss it.

We measure before we price

A ten-foot straightedge across the whole floor and, for anything glued down, in-slab humidity probes left the full 72 hours. Both readings are written down and both are yours to keep.

The estimate is four numbers

Material, labour, tear-out and substrate preparation, priced apart. It shows you where the money goes and it lets you hold any other bid to the same standard.

We name the standard we work to

Flatness tolerance tied to your chosen material, adhesive limits from the published data sheet, TCNA methods for tile assemblies. Not "to a high standard" — an actual figure.

We say when the cheaper option is right

A recoat instead of a full sand. Grinding instead of a pour. Waiting a season, when the ground is moving. Those are smaller jobs for us, which is exactly why the advice is worth something.

Where we work

Leander and the northwest Austin corridor — Cedar Park, Liberty Hill and Georgetown up on the limestone, Round Rock and Pflugerville along the escarpment, and out east to Hutto and Taylor on the black clay.

The practical limit is the return trip rather than the mileage. A sand and finish means being on site on consecutive days including the coating days, and past a certain drive that stops being schedulable honestly. If you are past it we will say so and give you a name closer to home rather than book you and let the dates drift.

Find out what is actually under your floor.

Bring us the room and we will measure it, put a straightedge and a moisture meter on the slab, and write the estimate up in parts — material, labour, tear-out, and whatever the substrate turns out to need. Four numbers instead of one lets you see where the money is going, and lets you hold any other bid to the same standard.

Book a measure (737) 287-1174

Mon - Fri: 7:00 AM - 6:00 PM, Sat: 9:00 AM - 2:00 PM

(737) 287-1174 Free estimate